Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
en:les [2018/02/05 10:49]
sylvain
en:les [2018/06/08 17:08] (current)
sylvain
Line 10: Line 10:
 ====== Installation ====== ====== Installation ======
  
-Download the installer ​at the following address: ​https://​api.lena.cloud/​dl/​sso+Download the installer ​(https://​api.lena.cloud/​dl/​sso) and launch the installation.
  
-Install ​LES and configure ​the firewall ​to accept inbound connections ​on TCP ports 4154 and 4155.+====== Client-side configuration ====== 
 + 
 +To configure LES, click on the ''​Enterprise Server''​ icon in the side-left menu (1): 
 + 
 +{{ configure_enterprise_server.png?​600 }} 
 + 
 +Then type in the server address on which you have installed LES (2). 
 + 
 +If the connection to the LES server succeeds, you will be presented a list of addresses at which LES can be reached (1) and choose to activate or not the authentication against the Active Directory (2): 
 + 
 +<callout type="​danger"​ title="​Attention"​ icon="​true">​ 
 +You should define only one connection address ​to the LES server. 
 +</​callout>​ 
 + 
 +{{ configure_active_directory.png?​600 }} 
 + 
 +Finalize the configuration by clicking on ''​Finish setup''​. 
 + 
 +====== Troubleshoot ====== 
 + 
 +LES has to be reachable ​on TCP ports 4154 and 4155. The installer will try to automatically configure the Windows firewall. Here is what to in case it does not work (if you use another firewall please refer to the corresponding documentation).
  
 Open the Windows firewall configuration then right click on ''​Inbound Rules''​ -> ''​New Rule''​ in the left section of the management console: Open the Windows firewall configuration then right click on ''​Inbound Rules''​ -> ''​New Rule''​ in the left section of the management console:
Line 31: Line 51:
  
 And then you can modify the profiles to which this rule applies and give it a name. And then you can modify the profiles to which this rule applies and give it a name.
- 
-====== Client-side configuration ====== 
- 
-To configure LES, click on the ''​Enterprise Server''​ icon in the side-left menu (1): 
- 
-{{ configure_enterprise_server.png?​600 }} 
- 
-Then type in the server address on which you have installed LES (2). 
- 
-If the connection to the LES server succeeds, you will be presented a list of addresses at which LES can be reached (1) and choose to activate or not the authentication against the Active Directory (2): 
- 
-<callout type="​danger"​ title="​Attention"​ icon="​true">​ 
-You should define only one connection address to the LES server. 
-</​callout>​ 
- 
-{{ configure_active_directory.png?​600 }} 
- 
-Finalize the configuration by clicking on ''​Finish setup''​.